Azinphos-Methyl: federal reporting thresholds

CAS 86-50-0. Listed under EPCRA 302, EPCRA 304 and CERCLA. Every federal threshold for Azinphos-Methyl, lowest first, each from the eCFR text with its citation.

Short answer: Azinphos-Methyl (CAS 86-50-0) is an extremely hazardous substance (EHS) under EPCRA §302. Its threshold planning quantity is 10/10,000 lb, two values because it is listed as a solid. Its Tier II reporting threshold is 10 lb if the solid is a fine powder, in solution, molten, or reactive; 500 lb otherwise, and its EPCRA §304 reportable quantity is 1 lb. It is also listed under CERCLA.

Federal thresholds, lowest first

ThresholdAzinphos-MethylMeasured asWhat it triggersCitation
EPCRA §304 reportable quantity (RQ)1 lbReleased within 24 hoursRelease notification to the SERC and LEPC40 CFR 355 App. A
CERCLA reportable quantity (RQ)1 lbReleased within 24 hoursRelease notification to the National Response Center40 CFR 302.4
EPCRA §302 threshold planning quantity (TPQ)10/10,000 lbOn site at any one timeEmergency planning notice to the SERC and LEPC within 60 days40 CFR 355 App. A
Tier II (EPCRA §312) reporting threshold10 lb if the solid is a fine powder, in solution, molten, or reactive; 500 lb otherwiseOn site at any one timeListing on the Tier II report, due March 140 CFR 370.10(a)(1)
Each threshold is measured differently, so the lowest number is not always the first one you reach. Count every pound of Azinphos-Methyl across the site, including its share of every mixture (how mixtures count). How the programs compare: thresholds compared.

Why there are two TPQs

Azinphos-Methyl is listed as a solid, so it carries two TPQs. The lower one, 10 lb, applies if the solid is a powder with particles under 100 microns, is in solution, is molten, or has an NFPA reactivity rating of 2, 3, or 4. Otherwise the TPQ is 10,000 lb (40 CFR 355.15).

That choice also moves the Tier II threshold, which is the lower of 500 lb and the TPQ that applies: 10 lb in those forms, 500 lb otherwise. The reduced counting rules for solutions and molten solids in 40 CFR 355.16 apply to the TPQ test only, never to the Tier II amount. The TPQ guide has a worked example.

Other names

Azinphos-Methyl also appears as: guthion; azinphosmethyl; azinphos methyl; azinphos; methylazinphos; metiltriazotion; methylgusathion; carfene; cotneon; cotnion.

Check a quantity

Enter what you hold in the TPQ lookup or the Tier II threshold checker. Chemsana does this for every chemical on site at once: it totals Azinphos-Methyl across every product by CAS number, checks it against each of these programs, and flags a purchase that would cross a threshold before it arrives. See intake decisions.

Sources

  1. EPA Consolidated List of Lists, EPA List of Lists, April 2025, loaded into Chemsana and synced November 7, 2026.
  2. 40 CFR Part 355, Appendix A (EHS list with TPQs and reportable quantities), eCFR.
  3. 40 CFR 370.10, thresholds for Tier II reporting, eCFR.
  4. 40 CFR 302.4, CERCLA hazardous substances and reportable quantities, eCFR.

Generated from EPA data, not written by hand. It summarizes federal requirements for general information. States can set lower thresholds or extra requirements, and it is not legal advice. Confirm obligations with your SERC, LEPC, or a qualified EHS professional.