Diethylzinc: federal reporting thresholds

CAS 557-20-0. Listed under OSHA PSM. Every federal threshold for Diethylzinc, lowest first, each from the eCFR text with its citation.

Short answer: Diethylzinc (CAS 557-20-0) is not an EPCRA §302 extremely hazardous substance, but it is listed under OSHA PSM. Its OSHA PSM threshold quantity is 10,000 lb. The lowest of its federal thresholds is 10,000 lb (Tier II).

Federal thresholds, lowest first

ThresholdDiethylzincMeasured asWhat it triggersCitation
Tier II (EPCRA §312) reporting threshold10,000 lbOn site at any one timeListing on the Tier II report, if it is a hazardous chemical that needs an SDS under OSHA HazCom40 CFR 370.10(a)(2)
OSHA PSM threshold quantity10,000 lbIn a processProcess safety management program29 CFR 1910.119 App. A
Each threshold is measured differently, so the lowest number is not always the first one you reach. Count every pound of Diethylzinc across the site, including its share of every mixture (how mixtures count). How the programs compare: thresholds compared.

Other names

Diethylzinc also appears as: diethyl zinc; diethylzink; diethylzinc 1m in hexanes; diethylzinc, 1.5m solution in toluene.

Check a quantity

Use the Tier II threshold checker. Chemsana does this for every chemical on site at once: it totals Diethylzinc across every product by CAS number, checks it against each of these programs, and flags a purchase that would cross a threshold before it arrives. See intake decisions.

Sources

  1. EPA Consolidated List of Lists, EPA List of Lists, April 2025, loaded into Chemsana and synced November 7, 2026.
  2. 40 CFR Part 355, Appendix A (EHS list with TPQs and reportable quantities), eCFR.
  3. 40 CFR 370.10, thresholds for Tier II reporting, eCFR.
  4. 29 CFR 1910.119, Appendix A, OSHA PSM highly hazardous chemicals, eCFR.

Generated from EPA data, not written by hand. It summarizes federal requirements for general information. States can set lower thresholds or extra requirements, and it is not legal advice. Confirm obligations with your SERC, LEPC, or a qualified EHS professional.