Short answer: Sodium Selenate (CAS 13410-01-0) is an extremely hazardous substance (EHS) under EPCRA §302. Its threshold planning quantity is 100/10,000 lb, two values because it is listed as a solid. Its Tier II reporting threshold is 100 lb if the solid is a fine powder, in solution, molten, or reactive; 500 lb otherwise, and its EPCRA §304 reportable quantity is 100 lb.
Federal thresholds, lowest first
| Threshold | Sodium Selenate | Measured as | What it triggers | Citation |
|---|---|---|---|---|
| EPCRA §302 threshold planning quantity (TPQ) | 100/10,000 lb | On site at any one time | Emergency planning notice to the SERC and LEPC within 60 days | 40 CFR 355 App. A |
| Tier II (EPCRA §312) reporting threshold | 100 lb if the solid is a fine powder, in solution, molten, or reactive; 500 lb otherwise | On site at any one time | Listing on the Tier II report, due March 1 | 40 CFR 370.10(a)(1) |
| EPCRA §304 reportable quantity (RQ) | 100 lb | Released within 24 hours | Release notification to the SERC and LEPC | 40 CFR 355 App. A |
Why there are two TPQs
Sodium Selenate is listed as a solid, so it carries two TPQs. The lower one, 100 lb, applies if the solid is a powder with particles under 100 microns, is in solution, is molten, or has an NFPA reactivity rating of 2, 3, or 4. Otherwise the TPQ is 10,000 lb (40 CFR 355.15).
That choice also moves the Tier II threshold, which is the lower of 500 lb and the TPQ that applies: 100 lb in those forms, 500 lb otherwise. The reduced counting rules for solutions and molten solids in 40 CFR 355.16 apply to the TPQ test only, never to the Tier II amount. The TPQ guide has a worked example.
Other names
Sodium Selenate also appears as: disodium selenate; natriumseleniat; selenic acid, disodium salt; sodium selenium oxide; sel-tox sso2 and ss-20; selenate, disodium.
Check a quantity
Enter what you hold in the TPQ lookup or the Tier II threshold checker. Chemsana does this for every chemical on site at once: it totals Sodium Selenate across every product by CAS number, checks it against each of these programs, and flags a purchase that would cross a threshold before it arrives. See intake decisions.
Sources
- EPA Consolidated List of Lists, EPA List of Lists, April 2025, loaded into Chemsana and synced November 7, 2026.
- 40 CFR Part 355, Appendix A (EHS list with TPQs and reportable quantities), eCFR.
- 40 CFR 370.10, thresholds for Tier II reporting, eCFR.
Generated from EPA data, not written by hand. It summarizes federal requirements for general information. States can set lower thresholds or extra requirements, and it is not legal advice. Confirm obligations with your SERC, LEPC, or a qualified EHS professional.