Arsenic chloride (AsCl3): federal reporting thresholds

CAS 7784-34-1. Listed under EPCRA 302, EPCRA 304, CERCLA and CAA 112(r). Every federal threshold for Arsenic chloride (AsCl3), lowest first, each from the eCFR text with its citation.

Short answer: Arsenic chloride (AsCl3) (CAS 7784-34-1) is an extremely hazardous substance (EHS) under EPCRA §302. Its threshold planning quantity is 500 lb. Its Tier II reporting threshold is 500 lb, and its EPCRA §304 reportable quantity is 1 lb. It is also listed under CERCLA and CAA 112(r).

Federal thresholds, lowest first

ThresholdArsenic chloride (AsCl3)Measured asWhat it triggersCitation
EPCRA §304 reportable quantity (RQ)1 lbReleased within 24 hoursRelease notification to the SERC and LEPC40 CFR 355 App. A
CERCLA reportable quantity (RQ)1 lbReleased within 24 hoursRelease notification to the National Response Center40 CFR 302.4
EPCRA §302 threshold planning quantity (TPQ)500 lbOn site at any one timeEmergency planning notice to the SERC and LEPC within 60 days40 CFR 355 App. A
Tier II (EPCRA §312) reporting threshold500 lbOn site at any one timeListing on the Tier II report, due March 140 CFR 370.10(a)(1)
CAA 112(r) threshold quantity15,000 lbIn a single processRisk Management Program and plan40 CFR 68.130
Each threshold is measured differently, so the lowest number is not always the first one you reach. Count every pound of Arsenic chloride (AsCl3) across the site, including its share of every mixture (how mixtures count). How the programs compare: thresholds compared.

The thresholds in gallons

At a specific gravity of 2.156, a US gallon of Arsenic chloride (AsCl3) weighs 17.98 lb (2.156 × 8.34). Basis: the pure liquid at 25 °C (NOAA CAMEO Chemicals 3.1.0 rev 1, citing USCG, 1999).

ThresholdPoundsGallons of the pure liquid
EPCRA §304 reportable quantity (RQ)
CERCLA reportable quantity (RQ)
10.05
EPCRA §302 threshold planning quantity (TPQ)
Tier II (EPCRA §312) reporting threshold
50027.8
CAA 112(r) threshold quantity15,000834
Gallons are rounded down. A solution or mixture holds less Arsenic chloride (AsCl3) per gallon. Use the specific gravity and concentration from your SDS, as shown in the gallons to pounds guide, or try the calculator.

Other names

Arsenic chloride (AsCl3) also appears as: arsenous trichloride; arsenic trichloride; trichloroarsine; trichloroarsane; arsenious chloride; arsenous chloride; ascl3; chlorure arsenieux; chlorure d'arsenic.

Check a quantity

Enter what you hold in the TPQ lookup or the Tier II threshold checker or the gallons to pounds calculator. Chemsana does this for every chemical on site at once: it totals Arsenic chloride (AsCl3) across every product by CAS number, checks it against each of these programs, and flags a purchase that would cross a threshold before it arrives. See intake decisions.

Sources

  1. EPA Consolidated List of Lists, EPA List of Lists, April 2025, loaded into Chemsana and synced November 7, 2026.
  2. 40 CFR Part 355, Appendix A (EHS list with TPQs and reportable quantities), eCFR.
  3. 40 CFR 370.10, thresholds for Tier II reporting, eCFR.
  4. 40 CFR 302.4, CERCLA hazardous substances and reportable quantities, eCFR.
  5. 40 CFR 68.130, CAA 112(r) regulated substances and threshold quantities, eCFR.

Generated from EPA data, not written by hand. It summarizes federal requirements for general information. States can set lower thresholds or extra requirements, and it is not legal advice. Confirm obligations with your SERC, LEPC, or a qualified EHS professional.